Both coating technologies are similar but have different attributes. The choice comes down to environmental concerns and handling, as much as to their power to protect and extend the life of your prints in conditions that work for you and your business.
| ColourShield Water-Based Coatings | Traditional Two-Component Coatings |
|---|---|
| Ready to use | Requires mixing |
| No pot-life limitations | Limited pot life after mixing |
| Reduced waste | Higher material wastage |
| Fast drying | Longer curing times |
| No isocyanate hardeners | Requires isocyanate hardeners |
| Low odour | Stronger odours |
| Water-based technology | Often solvent-based chemistry |
| Easier operator training | More complex handling |
| Lower environmental impact | Greater environmental burden |
| Designed for graphics applications | Often designed for industrial use |
